Swarm orchestration
Describe the outcome — a corridor to inspect, an area to cover, a perimeter to hold. SwarmHub decomposes it into roles, formations and flight legs, then keeps the plan valid as aircraft join, land or drop out.
Swarm command & control
One operator.
An entire swarm.
SwarmHub is the ground control layer for multi-drone operations. Plan a mission once, launch dozens of aircraft, and let the swarm negotiate formation, coverage and failure — while you command intent, not sticks.
Built for BVLOS · Mesh radio · Onboard autonomy
14 aircraft airborneMesh integrity 98%Sector 04 · Grid 51.7N 19.4E
- 1 : 48
- Operator to aircraft ratio
- < 80 ms
- Mesh telemetry round trip
- 6
- Mission domains supported
- 100 %
- Flights replayable frame by frame
Platform
Everything a swarm needs
between intent and impact.
We are building the full stack ourselves — planner, autonomy engine, mesh link and operator console — so the pieces behave like one system instead of six integrations.
Intent-based control
One screen, one cursor. Redirect the whole formation, split a wing off to investigate, or take manual authority over a single airframe without pausing the mission.
Mesh telemetry
Every aircraft relays for its neighbours. Position, battery, link quality and payload state stream back over a self-healing mesh built for dead zones.
Onboard autonomy
Separation, obstacle avoidance and contingency logic run on the airframe, so the swarm keeps flying safely through a lost link instead of freezing.
Airspace & safety
Geofenced volumes, altitude bands, no-fly exclusions and per-aircraft return-to-home rules — enforced in the air, not just drawn on a map.
Replay & reporting
Every mission is recorded frame by frame. Scrub the timeline, export evidence packs, and hand regulators a complete flight record.
See it running in the console
Roster, airspace, telemetry and timeline — the view an operator actually flies from.
The console
A cockpit for the whole fleet.
Roster, airspace and telemetry in one view. The operator watches the mission; SwarmHub watches the aircraft.
mission · corridor-inspection-114Live
0 ——— 500 m
PreflightLaunchSurvey sweepHandoffRecovery
Missions
One platform, many theatres.
The hard part of multi-drone work — coordination, coverage, contingency — is the same everywhere. Only the payload and the plan change.
Corridor inspection
Energy & infrastructure
Fly a transmission corridor with a formation instead of a single aircraft: one wing carries RGB, one carries thermal, a third relays the link past the next tower. A 40 km span becomes a single sortie.
- Tower & span capture
- Thermal hotspot flags
- Vegetation encroachment
- 6×
- faster corridor coverage
- 1
- operator on site
- 4K
- per-span imagery
Scout & treat
Precision agriculture
Scouts map stress zones ahead of the fleet while treatment aircraft follow the generated prescription. As tanks empty, SwarmHub rotates airframes through the refill point without stopping the pass.
- NDVI-driven tasking
- Automatic refill rotation
- Field-edge geofencing
- 1 200
- ha per day
- -38 %
- input volume
- 24/7
- rotation cycles
Time-critical coverage
Search & rescue
Draw the search area and the swarm splits it into overlapping lanes, weighted by terrain and last-known position. Thermal hits surface in the operator feed with a grid reference within seconds.
- Probability-weighted lanes
- Thermal detection queue
- Night-capable formations
- 8 min
- to first sweep
- 92 %
- area confidence
- < 5 s
- hit to alert
Persistent watch
Perimeter security
Keep a standing patrol over a site with staggered launch cycles so coverage never drops while aircraft swap batteries. On an alarm, the nearest units converge and hold an orbit on the contact.
- Rolling battery swaps
- Auto-converge on alarm
- Chain-of-custody video
- 0 s
- coverage gaps
- 3
- units per contact
- 100 %
- patrol logging
Volumetric capture
Survey & mapping
Parallel lawnmower passes flown by a formation with locked overlap and shared timing, so photogrammetry output stitches cleanly. Stockpiles, quarries and construction sites in a single flight window.
- Locked overlap ratios
- Synchronised triggering
- Direct-to-pipeline export
- 5×
- throughput
- ±2 cm
- GSD consistency
- 1
- flight window
Workflow
Four moves, start to finish.
The operator makes decisions. Everything between the decision and the airframe is ours.
- 01
Draw the mission
Sketch an area, a corridor or a perimeter. Pick payloads and constraints. SwarmHub returns a flyable plan with roles, timing and a fuel-for-coverage budget.
- 02
Launch the swarm
Arm once. Aircraft stagger their departures, claim their legs and build the mesh on the way up. No per-airframe checklists, no second pilot.
- 03
Adapt in flight
Battery drops, a link fades, a target moves. The swarm re-allocates work around it and tells you what changed — in plain language, not a log dump.
- 04
Debrief & prove it
Land, and the mission is already packaged: tracks, imagery, events and decisions, exportable as an evidence pack for clients or regulators.
Status · early development
Still in
the hangar.
SwarmHub is being built right now — we are not onboarding testers or taking sign-ups yet. If you want to know where this is heading, what the platform will fly, or you are working on something adjacent, write to us and we will tell you what we can.
- Partnerships
- Payload integration
- Technology
- Press